News Plastech
Husky is developing integrated Hylectric and Hypersync packaging molding platforms that combine injection molding machines, hot runners and mold control into one plastics processing system. These solutions target high productivity, energy efficiency and the processing of recyclates and bio-based materials.
From 2025, EU countries will have to collect used textiles and clothing separately, which increases the need for efficient recycling processes and shredding technology for the production of refuse-derived fuels.
Rising energy costs and declining competitiveness of the European plastics industry threaten the EU's strategic sectors and the region's production autonomy.
Barmag's eFK EvoSmart texturing machine, unveiled at ITMA Asia + CITME 2025, is gaining wide adoption among yarn producers thanks to reduced energy consumption and lower maintenance requirements.
A 379.47 kWp photovoltaic system financed by employee cooperative MaGeno-Solar eG has been commissioned at the KHS plant in Worms. The system is expected to supply around 342,000 kWh of electricity per year and reduce CO2 emissions by about 236 metric tons annually.
Bomat Energiesysteme has expanded its corrosion‑resistant heat exchanger range for biogas and sewage gas CHP units from 150 to 1,500 kW, using polymer composite tubes to enable both heat recovery and fuel‑saving retrofits with lower emissions.
Boy Schweiz will present the new Boy 35 Electric injection moulding machine and the compact Boy XS E at Swiss Plastics Expo 2026 in Lucerne, highlighting compact, precise and energy-efficient solutions for Swiss processors.
Sidel reviews the launch of its EvoBLOW Laser technology following the drinktec trade fair, highlighting energy savings, simplified operation and alignment with the company’s innovation culture.
Stadler Anlagenbau and Ecourbis Ambiental will build UTM Leste, a highly automated municipal solid waste treatment plant in São Paulo that will combine European engineering with Brazilian operating conditions to increase material recovery, RDF production and biogas feedstock.
Hennecke Group will showcase metering technology and system solutions for polyurethane processing at Putech Eurasia, held on 26–28 November 2025 in the Istanbul Expo Center, Hall 6, Booth B-230.
Evosys has installed a photovoltaic system of around 100 kWp on the roof of its production hall. The project expands on-site power supply, supports CO2 reduction and enables growth of the company’s charging infrastructure.
BOY will showcase the fully electric 50 Electric injection moulding machine at Plast Eurasia 2025 in Istanbul, producing espresso cups live. Together with Polmak Plastik, the company will highlight electromechanical drive technology and energy-efficient machine concepts.
Family-owned KVZ Hintermayr has commissioned a Vecoplan VIZ 1700 shredder at its Wertingen plant to increase throughput and flexibility in processing diverse plastic waste. The HiTorc drive and VSC system are intended to cut energy consumption and support stable extruder line operation.
PepsiCo Poland will launch an automated warehouse in Grodzisk Mazowiecki in Q3 2026, using Mecalux solutions. The system will connect production and shipping 24/7 and will be integrated with SAP EWM.
At K 2025, Taiwan showcased its strength in a distinctive way. Over 130 Taiwanese companies presented solutions in machinery, recycling, materials and automation, making Taiwan one of the most strongly represented non-European countries at the fair.
At K 2025 in Düsseldorf, Wittmann introduced the Drymax basic 120 mobile dry air dryer, emphasizing energy-efficient dual-cartridge technology, the SmartCare option for stable low dew points, and maintenance-friendly access in a compact design.
At K 2025 in Düsseldorf, Wittmann Battenfeld introduced a new MacroPower injection molding machine with a one-piece frame in the 400 to 600 t range, aiming to shorten installation, shrink the footprint and improve serviceability, while adding energy-saving features and expanded hydraulics.
Engel introduced the tie-bar-less victory electric injection moulding machine at K 2025, combining electric drives with a redesigned clamping unit. The model targets higher precision, energy efficiency and flexible mould-space utilisation in the clamping force range above 1,300 kN.
Pure Loop will debut DynaShape, an intelligent automation package for the Isec evo shredder‑extruder, at K 2025. The company reports up to 10 percent higher productivity and more consistent quality when feed material shape or bulk density varies.
Gabriel-Chemie Group has opened an expanded production facility in Nyíregyháza, Hungary, following an investment of approximately €6.5 million. The project increases capacity, modernises infrastructure and adds energy-efficient systems, including a planned 250 kWp photovoltaic installation.
Nordson BKG GmbH introduced new high-throughput sizes for its PolyNeo melt pump line at K 2025. The pumps support up to 20 tons per hour and feature advanced heating for precise thermal control, aiming to cut waste and energy use while maintaining consistent melt quality.
Hasco has extended its thermal insulating sheet range with 6 and 8 mm thicknesses and matching locating flanges, targeting energy efficiency and process stability in injection and compression moulding.
At K 2025 in Düsseldorf, the world’s leading trade fair for plastics and rubber, Bole proudly presents a powerful lineup of injection moulding innovations that are setting new benchmarks in efficiency, sustainability, and advanced applications.
SML has expanded its extruder portfolio with a co-rotating twin-screw model designed for high-output processing of polyolefins and polyesters. Tests on a CPP line indicate 10 to 15% lower specific energy input and up to 20% fewer gels compared with a single-screw extruder.
The guide outlines five steps to optimize vacuum systems, from diagnostics and goal setting to monitoring and maintenance, with a focus on energy efficiency and costs.
At K 2025, Arburg will run an electric Allrounder 720 A on Stand 13A13 to demonstrate injection compressing moulding with in-mould labelling for thin-wall PP cups. The setup targets lower material use and energy consumption, along with reduced clamping force.
At K 2025 in Düsseldorf, Netstal will demonstrate a high-performance cell for 1-liter in-mold labeled pails on the Elios 5500 PAC injection molding machine. The exhibit combines thin-wall molding, fast cycles and energy-efficient operation for packaging applications.
ENGEL will showcase an expanded temperature control portfolio at K 2025, including ultrasonic-based e-flomo and eco-flomo systems rated up to 160 °C and the new e-flomo one for high flow rates. The solutions target lower scrap, higher process stability and up to 50% reduction in cooling water use.
Freudenberg Performance Materials has published its first standalone sustainability report for its technical textiles business. The report outlines a 2045 Scope 1 and 2 CO2 neutrality goal and details 2024 progress in emissions, energy efficiency and renewable electricity.
Moog will present new hydraulic, electrohydraulic and electrohydrostatic solutions for plastics machinery at K 2025. The exhibit in Hall 11 will highlight a new pump concept for injection molding.
Wittmann Tempro temperature controllers are a cost-effective choice for applications requiring precise temperature control with straightforward operation. At K 2025, Wittmann will present a new controller design with a 120 °C operating temperature.
KraussMaffei has overhauled its all-electric PX injection molding series, citing a 20 percent smaller footprint and around 20 percent lower energy use. The range spans 800 to 2,000 kN and introduces the web-based MC7 control, updated drive and temperature control options, and a new hot runner controller.
Toyo Ink Europe has introduced Steraflex GIO, a low migration flexographic ink system formulated to comply with the German Ink Ordinance. The ink excludes intentionally added photoinitiator 379 and targets food and pharmaceutical packaging.
Lesbats Scieries d'Aquitaine has implemented four Vecoplan Toploader systems for storage and in-plant conveying of chips, bark, and sawdust. The solution feeds the pellet line and the boiler house, stabilizing material flow and reducing dust thanks to enclosed conveyors.
Hasco announces new solutions for mold bases and hot runner systems at K 2025, focusing on digitalization, process reliability and energy efficiency. Premieres will be shown live in hall/booth 1/C06.
Keeping the temperature balance of an injection moulding tool constant is of elementary importance for efficient and resource-saving production. Many factors can influence the parameters in an injection moulding cycle: the ambient temperature in the production rooms, the humidity and the temperature of the injection moulding machine.