News Plastech
Arburg will demonstrate sprue-free production of 0.002-gram POM microfilters at Fakuma 2026. The cell combines an electric Allrounder 270 A, a micro injection module and a Multilift Select 4 robot.
Wacker will present Elastosil LR 5471 at Fakuma, a self-adhesive liquid silicone rubber designed for hard/soft composite parts. The material is intended for applications including food contact, medical technology and infant care, often without thermal post-treatment.
Negri Bossi will exhibit two full-electric injection molding applications at Fakuma 2026 in Friedrichshafen. The demonstrations, prepared with Nissei Plastic, Sytrama and technology partners, target food-grade LSR molding and medical packaging production.
At Fakuma 2026, Engel will demonstrate a victory electric 1565/220 tie-bar-less injection moulding machine producing a high-precision liquid silicone rubber seal for an inverter component, with no rework required.
Matriq will present an integrated solution for permanent marking of plastic components directly in the injection molding process. The live demonstration combines a KEBO mold, an ARBURG injection molding machine and partner technologies.
Wittmann Group will present a production cell for stackable planters made from recycled polypropylene at Fakuma 2026. The live application combines Cellmould foam injection molding, inline thermography and compact automation.
Barlog Plastics will show developments in sustainable compounds, metal substitution and rapid tooling at Fakuma 2026. The company will also introduce the Kebapeak 9000 range based on PEKK for demanding operating conditions.
Elmet will show its SMARTshot i intelligent cold runner system for LSR injection molding at Fakuma 2026. The system analyzes the injection process, balances cavities automatically and optimizes nozzle pin positions.
Arburg will show electric Allrounder Trend injection moulding machines at Fakuma 2026. The exhibits will demonstrate automated production of automotive connector components and LSR closures with Multilift Select robotic systems.
1. Plastcompany will present plastics processing technologies at MSV Brno from 6 to 9 October 2026 and organise an open house in Hrušovany on 7 October. Live demonstrations will include three BOY injection moulding machines.
At Fakuma 2026, KraussMaffei will present the new all-electric PX series with AQCplus autonomous quality control, the LRXplus SE side-entry concept, and system solutions for plastics processing.
Wittmann will present the Feedmax Clean 300 vacuum material loader at Fakuma 2026. The new size is designed for higher material throughputs and integrated dedusting in applications using recycled materials.
Arburg will present its electric Allrounder Trend standard machines in the Czech Republic for the first time at MSV 2026 in Brno. The exhibit will include an Allrounder 1000 e Trend with a Multilift 4 linear robot system.
Billion SAS and Engel have agreed a strategic partnership covering service continuity for existing Billion machines and recommended supply of new injection moulding equipment. Billion will remain independent and continue as the main service contact for its installed base.
Fu Chun Shin will present injection molding systems focused on smart manufacturing and sustainability at TaipeiPlas 2026, including the SA-1000, the largest machine it has exhibited at the show.
Hasco will present new mould base, hot runner and digital solutions for tool and mould making at Fakuma 2026. The portfolio includes temperature control components, a high-performance grease, hot runner technology and CAD data access via 3Dfindit.
Sigma Engineering will present Sigmasoft Virtual Molding version 6.2 at Fakuma. Visitors will be able to prepare simulation models using their own mold or part geometry data during scheduled sessions.
KraussMaffei has introduced the LRXplus Twin, a multiple kinematic linear robot for demanding automation tasks in injection molding. The system is available in Twin X and Twin Z variants with load capacities from 35 to 100 kg.
At Fakuma 2026, Wintec will demonstrate a t-win 6500 two-platen injection moulding machine producing coat hangers for Leifheit in a live production cell. The exhibit combines a 4+4-cavity family mould, a linear robot and polypropylene copolymer processing.
KraussMaffei has introduced two ColorForm developments for in-mold coating of thermoplastic parts: a multi-color mixing head for automated color changes and a 0.1 mm polyurethane thin-layer process developed with Siegfried Hofmann GmbH.
Zahoransky will show its Z.Sonic turn tool concept for high-volume production of pen injector and autoinjector housings at Fakuma 2026. The system was developed in collaboration with Netstal and will be presented with the fully electric Elion MED injection molding machine.
Netstal is presenting the all-electric Elion 3200 CAP at Fakuma for high-performance beverage closure production. The machine combines a 3,200 kN clamping unit with the new electric injection unit 2000.
Wittmann will present the EcoFritz clamp at Fakuma 2026 in Friedrichshafen, demonstrating integrated injection molding, in-line granulation and material handling for closed-loop processing.
SABIC has introduced Ultem DU762 resin, a polyetherimide material designed for smartphone middle frames. The grade is compatible with non-conductive PVD sputtering and is positioned as an alternative to metal and glass fiber-reinforced PC.
Plastics account for about 50 to 60 percent of medical devices, according to BVMed. Their role in healthcare covers disposable products, implants, packaging and precision components for personalized medicine.
Fanuc will present all-electric injection moulding, robotics, artificial intelligence and digital manufacturing solutions at Fakuma 2026, with live demonstrations focused on productivity, quality and connected production.
Dr. Boy GmbH & Co. KG will present seven exhibits in the new design at Fakuma 2026. The display will include electromechanical and servo-hydraulic injection moulding machines, automation solutions and micro-injection moulding applications.
SEM Biotech has established an automated ISO Class 8 production platform for Vacusem vacuum blood collection tubes, with annual capacity of 500 million units. The investment is based on an integrated system supplied with Husky Technologies and Schöttli mold technology.
We have completed the largest technology migration in Plastech’s history. The portal has been moved to a new platform and thoroughly rebuilt, while the entire archive collected since 2002, including articles, market data, the company directory, B2B offers and the forum, remains available at the same address.
At Fakuma 2026, Oerlikon HRSflow will present hot-runner solutions for packaging, medical technology, cosmetics and automotive applications, including STARgate HRS, Xp nozzle series, TECHflow HRS and GLOW HRS developments.
Reifenhäuser North America has added six specialists in sales, service and customer care. The company is strengthening local support for extrusion and injection molding customers in the United States and Canada.
At Fakuma 2026, Sumitomo (SHI) Demag and technotrans will present all-electric injection molding applications for packaging, optics and medical technology, with a focus on process integration, energy efficiency and part quality.
Arburg has signed an agreement to acquire Stork Plastics Machinery B.V. from Stibbe Participaties B.V. The transaction is intended to expand Arburg’s portfolio in large injection moulding machines and packaging applications.
Sacmi hosted more than 300 participants from 66 countries at the Packaging Innovation Summit 2026 in Imola. The event focused on rigid packaging technologies, sustainability, digitalisation, process control and new materials.
Ningbo FCS delivered a customized HB-2500R electric horizontal rotary table multi-component injection molding machine to Koito for advanced automotive lighting applications.
Wittmann Group will show the complete Primus product range at Fakuma 2026, covering auxiliaries, robots and the EcoPrimus injection molding machine. The presentation focuses on cost, material and energy efficiency in standard injection molding applications.