News Plastech
Swoboda CZ in Jihlava has commissioned a fully automated cell with a Wittmann vertical injection molding machine for the production of switchbox housings, doubling production capacity and improving process stability in the manufacture of complex metal–plastic assemblies.
At JEC World 2026, Cannon will present the Nexus system for temperature control of composite molds, which reduces energy consumption by up to 70% compared to standard solutions and significantly shortens mold heat-up time.
Husky is developing integrated Hylectric and Hypersync packaging molding platforms that combine injection molding machines, hot runners and mold control into one plastics processing system. These solutions target high productivity, energy efficiency and the processing of recyclates and bio-based materials.
Britannia Industries has implemented its first-ever aseptic filling line in PET bottles for Winkin’ Cow dairy drinks at its Ranjangaon plant, based on Sidel’s integrated Aseptic Combi Predis system.
Husky highlights 25 years of investment in India and presents at Plastindia 2026 packaging market technologies focused on safety, cost efficiency and sustainability.
Dr. Boy and its Italian partner ST.A.TE Technologies will present the fully electric Boy 80 Electric injection moulding machine at Mecspe 2026 in Bologna, demonstrating the production of blood filters for medical applications.
Rauschert Steinbach has replaced semi-automatic injection molding cells with integrated cells equipped with Wittmann W828 linear robots. The standardized automation concept has reduced setup times, increased efficiency and enabled full control integration.
Christopher Vitz, Regional President Europe Central at Engel, comments on the role of the Fakuma trade fair as a European platform for plastics processing, summarising four decades of technological change and the current challenges facing the industry.
The “Pleiades” university competition – Plastic European Innovation Award for Design and Sustainability – in Italy links the plastics industry with IUAV University, promoting durable plastic products, design and injection moulding as part of the circular economy.
Netstal has appointed Kevin Green as President of Netstal Americas and Managing Director of Netstal Inc. The new executive will be responsible for the development of Netstal’s subsidiaries in the Americas.
Envalior, General Motors and Schaeffler have received the 2025 SPE Automotive Innovation Award in the Powertrain category for a thin wall electronic throttle control actuator gear based on Stanyl PA46, combining weight, cost and space savings with improved stiffness and wear resistance.
At Plastindia 2026 in New Delhi, BOY and its Indian representative Karan Engineering Co. will present an LSR application on a BOY 50 E injection moulding machine, highlighting high-precision processing of liquid silicone rubber for automotive and electronics components.
At Plastec West 2026 in Anaheim, Arburg will introduce its new Allrounder Trend electric injection moulding machine concept to the US market, focusing on fast setup, easy operation and integrated automation and digitalisation.
Envalior, General Motors and Schaeffler have received the 2025 SPE Automotive Innovation Award in the powertrain category for an ultra-thin wall electronic throttle control actuator gear made from Stanyl PA46, combining weight and cost reduction with increased stiffness and wear resistance.
Around 160 participants attended Arburg’s Smart Factory Information Day and ALS User Meeting in Lossburg, where the company presented practical approaches to using its MES and digital tools to increase transparency, flexibility and efficiency in plastics production.
Weihai RuiMu Precision has significantly expanded its injection moulding capacity in a new 12,000 m² facility in Weihai, basing its highly automated production on more than 20 Wintec machines from Engel to support global series manufacturing.
At PlastIndia 2026 in New Delhi, Coperion will present technologies and complete systems for compounding, recycling and polyolefin manufacturing, highlighting efficiency, reliability and process integration with solutions from Coperion, Herbold Meckesheim and Coperion K-Tron.
The 34th edition of Plast Eurasia Istanbul is held on 3–6 December at Tüyap Fair and Congress Center, featuring a refreshed corporate identity and an extended Plastics Days events program focused on innovation, technology and circular markets.
ENGEL Austria has commissioned in St. Valentin a fully automated vibratory finishing cell for plasticizing screws, based on Rösler trough vibrators and a Promot gantry system. The solution has reduced processing time, minimized manual work and increased quality repeatability.
At Swiss Plastics Expo 2026 in Lucerne, Arburg will present an electric Allrounder 370 A with Gestica control processing fibre‑rich “paper pearls” as an alternative to conventional petroleum‑based plastics.
ENGEL has established a clearmelt competence center to support customers worldwide in implementing polyurethane flooding processes for high-quality plastic surfaces, offering integrated project management from concept to series production.
The 30th Fakuma international trade fair for plastics processing will take place in Friedrichshafen from 12 to 16 October 2026, with organisers reporting strong early bookings and broad international participation from the plastics industry.
French closure specialist Novassu uses a KraussMaffei CXZ 250/1000-750 Multinject to produce crystal-clear cosmetic closures with 30% recycled content, combining sandwich and index plate technology for higher flexibility and consistent quality.
Elm-plastic, in collaboration with Biovox and Ultrapolymers Deutschland, has introduced the first commercially available bioplastic pipette for pharmaceutical and medical applications. The product uses MedEco compounds based on PLA or bio-based PE and meets common regulatory requirements.
Kinnarps, together with Polykemi and injection moulder Nolato, reduced CO2 emissions for a desk pedestal base frame by 86% through two consecutive material changes, first from PA6 to high-crystalline PP and then to recycled PP, without altering the production process.
Hasco received an honorary certificate from IKV at the K plastics exhibition in Düsseldorf, acknowledging more than five decades of membership and support for the institute’s research and training activities.
Hasco has introduced the H5055 hole filter for machine nozzles and sprue bushings, designed to reduce shear and pressure loss while extending service life. Magnetfabrik Bonn reports lower injection pressures and simplified maintenance in production use.
SABIC has introduced Noryl WM300G, a non-reinforced PPE/PS blend for water management applications. The material targets potential restrictions on butadiene in drinking water by avoiding conventional impact modifiers and offers higher burst strength than Noryl 713S.
Moretto has launched Hyper Cut, a plastics grinder available in two models with capacities up to 1,200 kg/h. The system features configurable rotors, 280 rpm operation and options for dust-free material handling.
Arburg Italy hosted its "Iniezione Next!" Open House in Peschiera Borromeo, welcoming more than 200 attendees for the Italian premiere of the electric Allrounder Trend alongside live demonstrations, expert lectures and partner consulting.
BOY presented nine exhibits in hall 13, booth A43, plus seven machines at partner stands, spotlighting the BOY 20 E Pro and the 1,000 kN BOY 100 Electric with integrated automation.
The Alpla Group has acquired the closure production facility of Serbia's Energoplast in Belgrade, adding compression and injection moulding capacity. The move expands Alpla's system-provider offering and regional footprint in South-East Europe.
ENGEL received four gold awards at the 2025 SPE Automotive Awards, recognising projects in electronical/optical parts, body interior, enabler technology and the Grand Innovation Award. The applications emphasise functional integration, lightweighting and measurable CO₂ reductions.
HK Cosmetic Packaging marked 50 years of collaboration with Arburg with the handover of its 150th Allrounder injection moulding machine, a hydraulic 720 S for thick-walled PET cream jars, at Arburg's Lossburg headquarters on 22 October 2025.
Kraiburg TPE has launched its third-generation FR3 thermoplastic elastomers, meeting DIN EN 45545-2 requirements for rail applications. The halogen-free compounds achieve UL94 V0 at 1.5 mm and pass the glow wire test at 960°C.
Zumtobel has introduced the second generation of its Tecton continuous-row luminaire system, again specifying Röhm’s Plexiglas PMMA molding compounds for the optics. The update expands optical options and emphasizes durability and circular design.