News Plastech
Meusburger reports a broad range of ejectors for injection molds and die-casting molds, along with digital tools supporting their selection and configuration. The company highlights the availability of standard components from stock and the option of quickly preparing ready-to-install variants.
Meusburger is introducing the high-performance flat guide E 1080, designed for injection moulds with limited installation space and high requirements in terms of load capacity, accuracy and wear resistance.
Meusburger has introduced a portfolio of mechanical, hydraulic and electrical components that support demolding in injection molds, including tool monitoring components.
Trelleborg Sealing Solutions will showcase sealing materials and components for front-end and subfab environments at Semicon Europa, stand 311 in Hall C1, Munich, on November 18 to 21. The company will also outline an expansion of its Malta manufacturing site.
Magnetfabrik Bonn has tested Hasco's new H5055 hole filter in series production, reporting a 20% reduction in injection pressure and extended service life. The company is phasing in the filter across its operations.
igus has introduced the complete drylin SLX-8060 linear axis with a dryspin lead screw drive, designed for rapid integration with aluminum profiles and loads up to 600 kg. The solution targets applications in logistics, robotics, and production cells in the packaging industry.
Hasco has extended its thermal insulating sheet range with 6 and 8 mm thicknesses and matching locating flanges, targeting energy efficiency and process stability in injection and compression moulding.
Hasco Hot Runner introduced the plug insert H12294 for 12 control zones that fits the same mounted housing as previous 6-zone variants while retaining a 16 A load rating. The solution targets limited-space moulds by replacing bulky connection boxes with a compact interface.
Keeping the temperature balance of an injection moulding tool constant is of elementary importance for efficient and resource-saving production. Many factors can influence the parameters in an injection moulding cycle: the ambient temperature in the production rooms, the humidity and the temperature of the injection moulding machine.
FIMIC’s new OEM-Relations Manager, Eng. Michael Heitzinger brings a passion to transform the plastics industry and ability to connect across borders from his international experience.
At the NPE in Orlando, Florida, KraussMaffei will be presenting innovative exhibits under the motto "Make plastic green - with high quality and efficiency".
The Reifenhäuser Group, leading manufacturer of extrusion machinery and components, will be exhibiting at Fakuma in Friedrichshafen from October 17 to 21, 2023.
Haitian International is expanding its production and logistics network in Europe and investing in the construction of a modern plant with a total area of 250,000 square meters at its site in Ruma, Serbia. The plant is scheduled to go into operation in the first quarter of 2025.
Nordson to supply a FastGap extrusion die for the production of panels made from recycling textile fibers and plastics.
The main product that was presented at this year’s K fair is a rotary screen changer for the plastics industry. Rotary screen changers represent the long provide version of screen changers for constant pressure processes in the world.
Exact wall thicknesses are of particular importance in the production of rubber tubes. If the wall thickness is too thin, quality is compromised – but if the wall is too thick, more material is needed in the production process.
Kistler announces the market launch of a new sensor to measure very small forces. The centerpiece: a newly developed, highly sensitive crystal that guarantees extremely precise measuring results.
Baumüller Austria presents intelligent drive and automation solutions at Smart Automation 2019 in Linz, Austria
Stäubli, one of the world’s leading providers of mechatronic solutions, is showcasing its groundbreaking technologies at the 2019 Hannover Messe and demonstrating how flexible production systems can already be reality.
With its new safety couplings Z80700HT/... to Z80801HT/... Hasco has set a milestone in safety standards for mould temperature control. An automatic safety lock protects against unintended unlocking.
One of the top five European manufacturers of plasticizing equipment, Şenmak Machinery broke a new ground in the Turkish plastic processing machinery industry.
At this year's Fakuma in Friedrichshafen from 16 to 20 October, Wittmann Battenfeld will present its new, vertical Vpower under the motto "be smart" in Hall B1, booth 1204. With this machine model, Wittmann Battenfeld is now also offering its vertical machine series in the PowerSeries design.
On 9 July 2018, the design world gathered in Essen, Germany, for the presentation of the internationally renowned "Red Dot Award" for design. These included the Gestica control system from Arburg, whose look and feel won over the 39-strong Red Dot panel of experts.
The Meusburger Group is taking over the Berlin software specialist Segoni. Segoni will continue as an independent enterprise, and all employees will be retained.
Milacron to display the largest operational injection molding machine ever at an NPE and more technologies from industry-leading product brands Mold-Masters, DME, and Kortec.
Upgrade provides individual drive motor power measurement and real-time operator visualisation to reduce production line downtime.
With the founding of the POWERFIL business unit, EREMA, the manufacturer of plastics recycling systems, once again extends its portfolio and now also offers the proven melt filter as individual components for existing extrusion plants.
At Fakuma (October 17-21, 2017), KraussMaffei will be demonstrating how flexibly the all-electric PX series as well as the hydraulic CX series can adapt to respective requirements.
A new coating technology from Nordson Corporation that substantially increases the abrasion- and corrosion-resistance of single and twin plasticating screws has received an award for innovation at the recent 21st Plastpol Poland show in Kielce, Poland.
The manufacturer of recycling systems is relying on new production processes with the optimum use of resources in its production of assembly groups.
Henkel's Loctite Impregnation Solutions provides a fast and reliable fix for the automotive industry.
FIPA ID GripperFIPA’s entire product range of ID grippers has been completely revised and made even more user-friendly.
Polish fruit juice producer Sokpol decided that the second line would be completely supplied by Sidel.