News Plastech
Avient has launched Cesa Solvent Barrier Technology, a fluorine-free additive for monolayer HDPE bottles produced by extrusion blow molding. The solution is intended to reduce solvent permeation without requiring retooling of existing lines.
During Packaging Dialogue Days Europe in Salzburg and Freilassing, Kiefel brought together representatives from across the packaging value chain. Discussions focused on PPWR, recycling, food contact, automation, and fiber and polymer solutions.
Scanfill is launching Scanfoil rPP POP film with a 30% share of post-consumer mechanically recycled PP. The material has been approved for food contact and is intended to meet upcoming PPWR requirements.
The organisers of interpack have announced a new date and a shortened schedule for the 2029 edition. The trade fair will take place from 10 to 15 June and will run for six days, from Sunday to Friday.
Klöckner Pentaplast has launched a new kp Infinity tray range for packed fresh fruit. The EPP packs are designed to be lightweight, durable and fully recyclable, while helping reduce product loss and improve packaging recyclability.
Belgian mineral water brand Ginstberg is introducing Amcor’s two-piece 28 mm tamper-evident closure for glass bottles. The solution is intended to provide product protection, ease of use, and alignment with growing requirements for returnable and reusable packaging.
R-Cycle and Tilisco have expanded the PPWR Compliance Compass with an integrated AI chatbot for handling regulatory queries. The solution is intended to support packaging manufacturers in assessing compliance and preparing PPWR declarations of conformity.
BMT has presented a methodology combining stretch blow moulding simulation and physical testing to predict deformation of lightweight PET bottles under altitude-related pressure changes. The study also shows the effect of fill volume on packaging resistance to paneling.
An analysis of extended producer responsibility systems across the 27 EU countries shows that the level of fees does not determine recycling performance. System design, eco-modulation, transparency and infrastructure are the key factors.
ThaiNamthip has installed a Sidel Hydra Ultrasonic bottle washer at its Pathumthani plant. It is the first installation of this system in Asia, aimed at improving washing performance while reducing the consumption of water, energy and chemicals.
At Interplast 2026 in Brazil, Arburg will present the Allrounder Trend electric injection moulding machine to the local market for the first time. At stand B15, the Allrounder 1800 e Trend will produce 48 PP screw caps live.
The seventh edition of PCI Days, held at EXPO XXI Warsaw, confirmed the growing importance of the event for the pharmaceutical, cosmetics and dietary supplements industries. This year's programme was expanded, among other things, with a new conference zone dedicated to dietary supplements.
Studies cited in the material indicate that touch and the material properties of packaging affect the perceived quality, credibility and attractiveness of a product. In this context, carton is gaining importance not only for environmental reasons, but also for sensory and brand perception factors.
On 17 September 2026, PET Pack CEE Forum 2026 will take place in Budapest, focusing on regulation, compliance and competitiveness across the PET packaging value chain in Central and Eastern Europe.
Coveris won Gold at the FIA UK Awards 2026 in the surface print on medium web film category. The award went to Tesco Finest Rosemary & Sea Salt Focaccia packaging, printed at the company’s Burnley site.
Coperion has received a Letter of No Objection from the U.S. FDA for its HDPE and PP recycling technology. It confirms that the combination of twin screw extruders and EcoFresh silo degassing enables the production of recyclates for direct food contact.
At European Label Forum 2026 in Seville, representatives of the European label industry discussed the market situation, the impact of regulation, digitalisation and the role of AI. Competitiveness, sustainability and changing customer expectations were at the centre of the debate.
Hubergroup Print Solutions is introducing low-tack versions of its NewV UV offset ink series. The new variants are intended to improve process stability with fluctuating substrate quality and high printing speeds.
GroupMosca and Siat Group have signed a strategic agreement to develop a joint offering of integrated packaging systems. The cooperation covers key global markets and is intended to combine both companies' technologies into coherent packaging lines.
Tosca believes reusable packaging is becoming an important part of European supply chain infrastructure. The company points to cost pressure, labour shortages and tightening packaging and packaging waste regulations.
Czech packaging manufacturer Unipack replaced an older extruder with a Gneuss OMNI extrusion system for polyester strapping production. The upgrade delivered higher output, greater process stability, and lower energy consumption and scrap rates.
Avient Corporation will present polymer colorants, additives and specialty material solutions at InterPlas Thailand 2026. The company will showcase products for automotive, healthcare, flexible packaging and bottle-to-bottle recycling applications.
Emirates Biotech will present Embio PLA biopolymers at Saudi Plastics & Petrochem 2026 in Riyadh. The event will also mark the official introduction of this portfolio to the Saudi market.
Carlsberg, in cooperation with DS Smith and KHS, is introducing a cardboard multipack for bottles with rounded edges to the Polish market. The solution is intended to improve brand visibility, reduce material use and lower the carbon footprint without significant changes to existing packaging lines.
Donaldson is expanding the use of its iCue Connected Technology to filtration equipment for compressed air, industrial gases and hydraulic fluids. The system is intended to support equipment monitoring, service planning and longer operating life.
In response to EU Regulation 2024/3190, igus has developed the iglidur A351 material for machine components that come into contact with food. The material is free of BPA and BPS, complies with FDA requirements, and is available in several processing forms.
Amcor has obtained RecyClass Recycled Plastics Traceability Certification for selected flexible products manufactured at its UK sites. The move is significant in light of changes to the UK Plastic Packaging Tax that will take effect in April next year.
GreenDot and osapiens have entered into a strategic partnership to deploy an integrated platform for packaging EPR compliance in Europe. The solution is intended to support PPWR reporting across EU markets.
At the "Inside the Future of Food Packaging" event, kp brought together representatives of retail, recycling, technology and manufacturing to discuss how regulation, recycling, soft plastics and AI are shaping food packaging.
Lindner Washtech has partnered with Indian company Srichakra Polyplast to supply two advanced washing lines for processing post-consumer film and rigid plastic waste. The project is intended to increase the supply of high-quality PCR recyclates on the Indian market.
At ProPak Asia 2026, Husky is presenting solutions for packaging producers in Southeast Asia, focusing on production efficiency, conversion costs, rPET use and sustainability requirements.
At Interzero's 13th Environmental Conference, discussions focused on the PPWR, extended producer responsibility, packaging ecodesign and digital product passports. Nearly 200 business representatives and experts took part in the event.
Thai Coconut has implemented a complete aseptic PET line from Sidel for the production of still and carbonated coconut beverages. The installation is intended to increase production flexibility, meet export requirements and reduce resource consumption.
At the European Label Forum 2026 in Seville, Finat announced the appointment of Dana Kilárska as president and Vito Giurazza as vice-president. At the same time, Philippe Voet and Chris Ellison were awarded honorary membership.
Jean-Marc Galvez has been elected president of European Plastics Converters for the 2026-2028 term. He will succeed Benoit Hennaut, who has led the organisation for the past four years.
Industry associations and a broad coalition of businesses have called for the timely and effective implementation of the PPWR. The signatories stress the importance of a stable and predictable regulatory framework for investment in recycling and the circular economy in Europe.