Exolon Group: HexaLumina artwork with polycarbonate canopy
Anaisa Franco's permanent HexaLumina installation in Dallas combines organic photovoltaic cells with transparent pink solid polycarbonate sheets supplied by Exolon Group.
Plastics goods
News Plastech
Competek supports FMCG line conversions
Competek offers an integrated line conversion service for FMCG manufacturers. The solution is intended to simplify packaging format changes, reduce downtime and support the optimisation of existing equipment.
On scales CO2-based EVA foam to over one million pairs
On is launching the Cloud X 5 with a midsole made of EVA foam produced using captured CO2 emissions. The company says the solution has scaled to more than one million pairs and, according to an LCA, reduces modeled carbon impact by more than 80% compared with conventional EVA.
Syensqo and Bucci Composites advance automotive composites
Syensqo and Bucci Composites have signed an agreement covering the use of Double Diaphragm Forming technology and the joint qualification of materials for larger-scale production of automotive parts.
Mineral fillers for light FKM seals without carbon black
A comparative study evaluated high-performance mineral fillers in a standardized FKM system, showing that they enable light, tintable compounds with low compression set and improved dimensional stability compared to carbon black systems at equal hardness.
New Mocha bottle from Amcor for beauty and personal care
Amcor has launched the Mocha standard plastic bottle for the beauty and personal care sector, offering extensive customization options, three sizes and a low minimum order quantity.
Composite wings of the O.L.I.V.I.A. drone with XECARB 40-C20-3DP filament
Xenia Materials and the Fly-Mi EUROAVIA Milano student team from Politecnico di Milano have developed the O.L.I.V.I.A. drone for the UAS Challenge 2025, using 3D-printed composite moulds made from carbon fibre reinforced polycarbonate XECARB 40-C20-3DP.
New iglidur i4000 resin for 3D printing of gears
Igus has launched the iglidur i4000 resin for manufacturing precise, wear-resistant gears using DLP, SLA and LCD technologies. Compared with standard 3D printing resins, the material offers higher elongation at break and extended service life.
Novoplast Schlauchtechnik launches hose sample take-back service
Novoplast Schlauchtechnik, a company of the Masterflex Group, is introducing a free hose sample take-back service in Germany as part of its transition towards a circular economy.
Recycling mixed-fibre garments enabled by Radici InNova technology
Radici InNova, The LYCRA Company and Triumph have developed and validated a recycling process for mixed-fibre garments, enabling the recovery of polyamide and Lycra fibres and the production of underwear in a closed-loop system.
Avient presents ColorForward 2027 color trend palette
Avient has introduced ColorForward 2027, the 21st edition of its annual color trend forecasting tool for the plastics industry, translating four identified societal trends into 20 color and effect concepts for thermoplastic polymers.
Polyvantis to debut at K 2025 with multi-material showcase
Polyvantis will make its first appearance at K 2025, presenting a booth constructed largely from its own film and sheet materials. The exhibit brings together the Plexiglas and Lexan portfolios under one multi-material offering.
Norda and Envalior develop a durable trail shoe
Norda and Envalior have introduced the 001A trail running shoe featuring a midsole based on Arnitel Performance. The model targets higher energy return and lower weight versus the original 001 while maintaining long-distance durability.
Exolon Group introduces Panel 60 HX for translucent facades
Exolon Group has launched the Exolon Panel 60 HX, a 60 mm polycarbonate panel with a Hybrid-X structure for translucent facades. An Ecoplus variant uses biocircular raw materials attributed via ISCC PLUS mass balance, with up to 89 percent from non-fossil sources, according to the company.
Masterflex introduces Master-PUR DualFlow food hose
Masterflex SE has launched the Master-PUR DualFlow 1.6 Food A, a spiral polyurethane hose with a seamless thermoplastic inner lining designed to improve hygiene and flow. The product meets EU 10/2011 and FDA 21 CFR 177.2600 and 177.1680 for use in food, pharmaceutical and biotech processes.
Borealis introduces renewables-based polymer grade for footwear midsoles
Borealis launches renewables-based ethylene vinyl acetate (EVA) solution developed specifically for footwear midsole applications.
CJ Biomaterials completes trials of new Phact PHA grade
New PHA compound leverages CJ’s unique amorphous PHA formulation and expands their portfolio of product grades suitable for straw manufacturing that began with their industrially compostable grade: PHACT CA1270P.
Fakuma 2024 took place with great success
Fakuma 2024 took place successfully under the motto “Digital meets Circular Economy”. From October 15 to 19, 2024, 1,639 exhibitors presented their innovations in efficiency, sustainability and the circular economy in twelve full halls and fully booked foyers. With an exhibitor share of 47.5% (previous year: 44.0%), this year's trade fair event once again held a high global position for the plastics processing industry. Of the total of 1,639 exhibitors (+3 compared to 2023), 778 came from many countries - including 167 companies from China, 142 from Italy, 81 from Switzerland, 77 from Austria and 51 from Turkey.
Unlock new levels of performance with Sidel: FachPack 2024
This September, on stand Sidel will be highlighting its cutting-edge solutions helping manufacturers unlock new levels of performance from their production lines.
TaipeiPlas 2024 & ShoeTech Taipei 2024 kicks off in September
The TaipeiPlas 2024 (Taipei International Plastics&Rubber Industry Show), the biennial event, is expected to host 400 exhibitors in 1,800 booths, achieving a 38% increase in scale compared to the 2022 edition.
BASF at The Battery Show Europe 2024
The chemistry to power up sustainable mobility. BASF will be showcasing its innovative power solutions at The Battery Show Europe 2024 in Stuttgart, Germany
One Untha shredder − all the relevant features
The Untha XR3000RC mobil-e shredder combines all the important features and is therefore ideal for shredding plastics, foils and other materials.
BASF accelerates its Plastics Journey at Plastics Recycling Show Europe 2024
BASF is set to showcase further milestones on their plastics journey at the upcoming Plastics Recycling and Sustainability Conference Europe (PRSE) 2024.
PRSE 2024: The future of plastics recycling
GreenDot presents a comprehensive range of high-quality plastic recyclates / Major advances in mechanical recycling, first projects and international network for advanced recycling.
PulPac appoints Charlotte Walldal as Chief Technology Officer
PulPac, the leading innovator in Dry Molded Fiber technology, proudly announces the appointment of Charlotte Walldal as Chief Technology Officer (CTO).
Closed-loop recycling of HDPE
Pellets for food contact with OMNImax recycling system
AMUT will exhibit at IFAT 2024
At IFAT 2024, AMUT will present its extensive portfolio of recycling products and services, consisting of sophisticated solutions for the selection and recovery of a wide range of different materials, as well as integrated sorting and washing of plastics.
We care about the safety of our planet on a daily basis
For Plast Box, a leader in the packaging industry, it is clear that every step towards sustainability is of colossal importance. Its commitment is evidenced by its recent J.S. Hamilton "Useful for recycling" certification.
Celanese and Under Armour Develop Innovative New Neolast Fiber
Neolast Fiber Offers Elevated Stretch Performance While Helping Address Sustainability Challenges Associated with Elastane
Europe R-PE continues to face tough trading conditions although some optimism remains
The majority of players expect recycled polyethylene's (R-PE) tough trading conditions to continue into 2024 due to ongoing bearish macroeconomic conditions, although many expect this to improve compared with 2023.
Building a circular economy in the packaging industry: progress and challenges in 2023
Once again this year, the subject of how to establish a circular economy has gained significant pace.
Injection molding machine with 8800 t
Innovative power giant from Haitian helps to support the water supply in Europe
Advances thermal management and high quality electrical components
The demands on electrical performance and mechanical strengths are becoming ever greater. As electronic components become smaller and smaller, entirely new challenges also arise.
MCG Presents Lightweight Advanced Energy Storage System
Mitsubishi Chemical Group exhibited its newest innovation in the form of an electric vehicle battery all-composite enclosure as the centerpiece of its activities at The Battery Show.
Topline MK2 – royalty among high-pressure metering machines
Hennecke presents its top model for the most demanding and highly automated special applications
Winners of the Formnext Start-up Challenge
As part of its ninth international Start-up Challenge, Formnext has recognized up-and-coming enterprises from the world of Additive Manufacturing for their innovative business ideas and technical developments.